Cisco Optical Technology Advanced v2.0

In this self-paced course, Cisco Optical Technology Advanced v2.0, students will learn how to design DWDM networks using the Cisco Transport Planning (CTP) tool. You learn how the 40- and 80-channel mesh networks are designed, and you set up a six-node WXC-based 40- or 80-channel mesh network. This transport management course will also instruct students how the 40-channel SMR1 and/or SMR2 network is designed and set up a six-node 40-channel network. In the hands-on labs, you learn to configure: the Cisco Transport Controller, the 10 Gbps (G) data cards, the 1 gigabit/10 gigabit Ethernet enhanced crossponder, any rate muxponder and crossponder, 100G transponders and muxponders, 10G encryption, and T1 over Ethernet. There is also a review of G.709 encapsulation, G.7041 Generic Framing Protocol (GFP), forward error correction and coherent transmission. Additionally, the DWDM Networks course will instruct learners how to add a node to the existing six-node ring and troubleshoot the configuration. The Cisco Optical Technology Advanced course combines lecture materials and hands-on labs throughout to make sure that you are able to successfully deploy a Cisco data over DWDM network. 

Upon completing this course, the learner will be able to meet these overall objectives:

  • Upon completion of this course, you should be able to:
  • Run the Cisco CTP tool and design sample DWDM networks
  • Principles of a wavelength cross-connect (WXC)-based mesh network
  • Configure a six-node WXC-based mesh network and create DWDM circuits
  • Principles of a single-module ROADM (SMR) based mesh network
  • Configure a six-node SMR-based mesh network and create DWDM circuits
  • Configure the 10-GB data cards with appropriate G.709 options and create data circuits
  • Install and configure the any rate crossponder card for 8 x 20 protected data mode
  • Properly configure Ethernet options for Layer 1 transport using the Gigabit Ethernet and 10 Gigabit Ethernet crossponder cards
  • Install Ethernet options for Layer 2 protected and unprotected data ring circuits using the Gigabit Ethernet and 10 Gigabit Ethernet crossponder cards
  • Provision incoming class of service (CoS) marking by port and by customer VLAN and incoming traffic shaping
  • Understand -general queuing theory and set up quality of service (QoS) as implemented in the Gigabit Ethernet and 10 Gigabit Ethernet enhanced crossponder cards
  • Install and connect circuits to carry T1 over Ethernet
  • Install and configure 100 Gigabit Ethernet transponder and muxponder cards and circuits
  • Install the 10G Encryption Card and verify error-free operation
  • Add a node to the existing six node 40-channel ring
  • Troubleshooting techniques and lab

This new Cisco self-paced course is designed to be as effective as classroom training. Course content is presented in easily-consumable segments via both Instructor Video and text. Interactivity is enabled through Discovery Labs, content review questions, and graded Challenge labs and tests. This makes the learning experience hands-on, increasing course effectiveness, and provides students direct feedback on how well they have mastered the material. And gamification features are built in, including earning badges and a leaderboard, to encourage better performance.

CiscoCisco Optical Technology Advanced v2.0 E-Learning
Price
$750.00 for 1 year of access
Questions?

The NterOne team will be happy to answer your questions.

Email: sales@nterone.com

Phone: 703-991-5185

360 degrees